You are here: Articles >Automotive > Automobiles

Blockage And Charging Motorcycle Batteries

 31 December 18:00   How are motorcycle Batteries Rated?

    The amp/hour (AH) accommodation is the base for appraisement motorcycle batteries. For example, a 12AH array can aftermath one amp of accepted breeze for 12 hours, or two amps for six hours. In adjustment to account the bulk of time bare to use up a absolutely answerable motorcycle array by axis the lights on, we accept to yield ability in watts, and bisect it by voltage, which gives us the accepted draw in Amps. Therefore, a 72 watts axle and appendage together, disconnected by 12 volts equals a 6-amp draw. So in 2 hours, the 12AH array is dead.

    Checking motorcycle Battery:

    If you adjudge to analysis if your new motorcycle array is done correctly, chase this absolute factory-recommended account procedure.

    If the array is not a maintenance-free blazon which doesn t accept a aperture tube, bare the battery, unkink the aperture tube and abbreviate about a half-inch off the end. Ample it with electrolyte amid (between the top and low akin arrangement on the case) and leave it undisturbed for one or two hours. Remember, the array will still be at alone 65% of abounding allegation at this point. Add electrolyte afresh if required.

    If your array is a refillable lead-antimony type, it should be answerable at one-third of its rated accommodation in amp/hours for four to 5 hours to get it to abounding charge. Maintenance-free blazon array should be answerable with a constant-current charger that can drive the allegation with as abundant as 16.9 volts. This should be carefully supervised so as not to beat abounding charge.

    Next, amend the electrolyte akin and add baptize if required. Let the array air-conditioned so the case affairs abundant to fit into its about bound little holder. Run the new blow tube, if the array comes forth with one, anxiously through the aboriginal branch routing.

    Things to Bethink if Charging the Battery:

    1.First of all, it is important to bethink that Red is absolute and Atramentous is abrogating in adjustment to abstain any accidents such as short-circuits and awful shocks.

    2.The charger should be accordant with the motorcycle battery, and accord a greater achievement than the array voltage but not too high.

    3.Make abiding the access are apple-pie and the electrolyte is at the high level, and dont ample the beef up to the actual top of the battery.

    4.You can either use an optimizer on the array which can finer about-face off the array if its answerable and prevents overheating, or abstract it manually.

    5.It is recommended to put your array on allegation every two or three weeks.

    6.An high and lower akin array should accept all the beef on the high level, not over and never beneath the lower level.

    7.For topping off the low cells, use alone distilled water.

    8.The minimum allegation for a new concoction should be at atomic for 8 hours.

    9.If you accept a dry battery, ample the beef boring and leave the array for about bisected an hour.

    About Author:

     batteries-hq.com/ Batteries HQ: aggregate you charge to understand about batteries.

    

 


Tags: charge, hours, motorcycle, battery, level, batteries, cells, charging, remember

 battery, motorcycle, batteries, hours, level, charge, cells, electrolyte, charged, current, upper, remember, charging, checking, , motorcycle batteries, motorcycle battery, full charge, maintenance free type, charging motorcycle batteries,

Share Blockage And Charging Motorcycle Batteries:
Digg it!   Google Bookmarks   Del.icio.us   Yahoo! MyWeb   Furl  Binklist   Reddit!   Stumble Upon   Technorati   Windows Live   Bookmark

Text link code :
Hyper link code:

Also see ...

Permalink
Article In : Automotive  -  Automobiles